- 3种钢桥细节基于断裂力学方法的裂纹扩展研究
- 5CrNiMo芯辊断裂失效分析及疲劳寿命研究
- 35CrNiMo圆柱齿轮齿根弯曲疲劳裂纹扩展分析及寿命预测
- Ⅰ型裂纹稳定扩展裂尖塑性区研究
- FRANC3D计算应力强度因子的可靠性及网格参数对精度影响的研究
- Franc3D裂纹扩展计算中初始裂纹的参数确定
- FRANC3D软件裂纹扩展计算功能评估
- 齿轮构件接触疲劳寿命评估方法及可靠性研究
- 齿根裂纹对应力强度因子影响的研究
- 超细晶钢焊接接头的断裂与疲劳研究
- 柴油机连杆疲劳断裂仿真研究
- 采煤机行走轮齿根裂纹缺陷评估技术
- 采煤机行走轮齿根裂纹扩展寿命仿真分析
- 采煤机行走轮齿根断裂特性分析
- 材料和结构中缺陷对大深度载人舱耐压球壳的影响分析
- 半圆弯拉下岩石内裂纹扩展规律数值模拟研究
- 半球形表面缺陷影响下表面裂纹应力强度因子的数值分析
- TC21钛合金β锻造组织的损伤容限性能分析研究
- H2S环境中疲劳裂纹扩展速率数学模型的建立及行为研究
- 自升式海洋平台桩腿焊缝裂纹扩展模拟及寿命预测
- 轴承表面残余应力对滚道接触应力及裂纹扩展速度的影响
- 中高浊服役环境下激光冲击镍基合金试验与机理研究
- 直齿圆柱齿轮齿根裂纹的扩展分析和疲劳寿命预测
- 预应力CFRP板加固钢结构的疲劳裂纹扩展机理研究
- 应力强度因子和裂纹扩展判据的典型算法
- 有限宽切槽对CCNBD断裂试样应力强度因子的影响
- 一种旋翼轴裂纹扩展寿命分析方法
- 一种基于FRANC3D的高压气瓶安全性评定的新方法
- 岩体三维裂隙拉伸断裂机理的试验与数值模拟研究
- 压力容器内外壁轴向双裂纹相互作用
- 牙科陶瓷材料滑动接触断裂行为研究
- 压力容器表面裂纹疲劳扩展的数值计算
- 斜齿圆柱齿轮裂纹扩展特性及剩余寿命研究
- 无限大板孔边双裂纹应力强度因子和裂纹面张开位移研究
- 涡轮盘销钉孔损伤容限分析新方法及其应用
- 涡轮盘中心孔三维疲劳裂纹扩展分析
- 涡轮盘篦齿裂纹扩展的有限元数值模拟
- 网格技术对应力强度因子计算的影响
- 同轴对转行星齿轮传动优化与有限寿命评价
- 索承式桥梁腐蚀吊索安全性能评估
- 水力压裂起裂与扩展分析
- 随机振动疲劳试验的小裂纹扩展分析方法
- 水力耦合作用下岩体3维裂隙的起裂扩展模式研究
- 双面焊U肋内侧焊缝初始裂纹特性研究
- 双轴弯曲载荷下表面裂纹应力强度因子的数值计算
- 受压脆性岩石_型复合裂纹水力压裂研究
- 深水立管环缝裂纹扩展和疲劳寿命仿真研究
- 设应力吸收层的复合式路面反射裂缝扩展路径模拟
- 三维断裂分析软件FRANC3D
- 三维断裂分析软件FRANC3D教程浅析
- 三维齿轮轮齿断裂数值分析与扩展模拟
- 人工心瓣热解炭表面微裂纹应力强度因子分析
- 热解炭表面复合型裂纹初始起裂角研究
- 热壁加氢反应器堆焊层裂纹的热_机械疲劳研究
- 輕型運動類飛機起落架損傷容忍分析
- 热壁加氢反应器堆焊层表面裂纹疲劳扩展的数值模拟
- 潜器锥柱结构断裂疲劳特性数值仿真研究
- 汽车悬架螺旋弹簧疲劳断裂仿真分析与寿命估算
- 平行偏置裂纹相互作用及其合并条件
- 起落架调节接头开裂及安全评估方法分析
- 偏置三维内裂纹单轴拉伸裂纹扩展数值模拟
- 某GH4169动力涡轮盘裂纹扩展研究
- 耐久性分析相对小裂纹扩展速率公式的参数确定方法
- 某GH698高压涡轮盘裂纹扩展研究
- 面向疲劳性能的腹板开孔加强结构形状与尺寸参数分析与设计
- 铝合金薄壁件铣削变形仿真及疲劳寿命预测
- 轮轴表面损伤下的疲劳可靠性研究
- 裂纹稳定扩展的FRANC3D研究
- 连杆疲劳断裂失效研究
- 裂纹缺陷对管线强度影响规律的研究
- 冷作模具钢DC53的断裂性能试验及滚轧轮轮齿裂纹扩展分析
- 拉杆疲劳裂纹导致的组合转子性能退化研究
- 孔边多裂纹结构的裂纹扩展寿命研究
- 具有裂纹损伤的深水立管疲劳断裂数值仿真研究
- 径向压缩圆盘试样的动静态应力和应力强度因子数值分析
- 渐开线齿轮齿根疲劳断裂特性分析
- 基于子模型法的带有表面裂纹钢丝应力强度因子研究
- 基于有限元仿真的直齿轮齿根裂纹扩展规律分析方法
- 基于图像处理裂纹网简化的连铸辊寿命预测研究
- 基于损伤容限法的连杆剩余寿命分析
- 基于疲劳试验与仿真的直齿轮齿根裂纹扩展规律分析方法
- 基于能量模型的三维穿透裂纹扩展研究
- 基于裂纹扩展的齿轮弯曲疲劳寿命仿真分析
- 基于工业CT图像的工件内部裂纹自动提取与扩展分析
- 基于断裂力学方法的粉末盘低周疲劳寿命预测
- 基于断裂力学的钢桥疲劳裂纹扩展与寿命评估方法研究
- 基于边界元法的疲劳裂纹扩展轨迹模拟
- 基于VP-MFC的采煤机摇臂系统齿轮性能退化可靠性分析
- 基于FRANC3D计算三维疲劳裂纹最大应力强度因子
- 基于FRANC3D和ABAQUS联合仿真三维疲劳裂纹扩展分析及寿命预测
- 基于FRANC3D环境的高强度螺栓应力腐蚀断裂仿真研究
- 基于FRANC3D的三维疲劳裂纹扩展的数值模拟
- 基于FRANC3D的轮齿裂纹特性研究
- 基于FRANC3D的飞机蒙皮谱载疲劳裂纹扩展分析
- 基于FRANC3D的采煤机行走轮齿根裂纹扩展特性研究
- 基于FRANC-3D的7075铝合金裂纹扩展仿真分析
- 基于ABAQUS_Franc3D的孔边疲劳裂纹扩展分析
- 机翼整体壁板裂尖应力场及其胶接修补研究
- 机翼蒙皮结构多部位损伤研究
- 机身与起落架连接接头疲劳强度分析方法研究
- 混凝土索塔开裂行为的宏细观力学分析
- 淮安板闸遗址受力性能的非线性有限元分析
- 焊接节点表面裂纹复合型应力强度因子的数值计算研究
- 含有裂纹的核级管道的LBB分析及其微观裂纹分子动力学研究
- 含销钉孔边裂纹的某压气机轮盘裂纹扩展分析
- 含三维圆弧形裂纹圆盘应力强度因子分布及起裂规律
- 含三维深埋裂纹脆性岩石水力压裂数值模拟研究
- 含三维内裂纹试件水力压裂裂纹扩展数值模拟研究
- 含三维内裂纹试件单轴拉伸裂纹扩展数值模拟研究
- 含缺陷涡轮盘的实际使用寿命计算方法
- 含缺陷船体纵骨节点疲劳裂纹扩展寿命评估
- 含偏置裂纹试件单轴拉伸试验数值模拟研究
- 含内裂纹试件水-力耦合裂纹扩展研究
- 含裂纹曲轴动力学分析及裂纹扩展剩余寿命研究
- 含裂纹核级管道三维有限元分析与LBB评定
- 含裂纹核级管道三维有限元分析与+LBB+评定
- 含半球形缺陷无限大弹性体表面裂纹的数值分析
- 海洋工程用钢疲劳裂纹扩展速率试验研究及有限元分析
- 海洋导管架平台焊接节点低周疲劳性能
- 公铁两用斜拉桥索梁锚固结构疲劳性能与疲劳寿命研究
- 高温合金盘多源疲劳裂纹萌生及扩展特征高温合金盘多源疲劳裂纹萌生及扩展特征
- 高铁轴承动态仿真及疲劳分析
- 高速列车制动盘表面裂纹的扩展特性
- 高速列车锻钢制动盘多裂纹间作用机制研究
- 钢筋蚀坑对其疲劳断裂特性的影响
- 钢筋混凝土锈胀裂缝的演化过程研究
- 钢管混凝土T型节点疲劳裂纹应力强度因子研究
- 刚柔耦合采煤机截割部动态与渐变可靠性研究
- 非共面双裂纹扩展相互作用的试验及模拟
- 飞机起落架延长使用寿命研究的新途径
- 飞机起落架疲劳与可靠性技术研究综述
- 反应堆压力容器的临界裂纹长度分析
- 动车组车轮修程修制理论研究和实际验证
- 典型缺陷车轴应力分布及对疲劳性能影响研究
- 大模数淬火齿条表面裂纹扩展规律及寿命预测研究
- 船用球扁钢焊接节点疲劳裂纹扩展的仿真方法研究
- 船舶构件共线多裂纹应力强度因子研究
- 齿轮弯曲疲劳强度及疲劳裂纹扩展研究
- 齿轮疲劳寿命及齿根裂纹仿真分析
- A Digital Twin Feasibility Study (Part II)-Non-Deterministic Predictions of Fatigue Life Using In-Situ Diagnostics and Prognostics
- Uncertainty Quantification In Crack Growth Modeling Under Multi-axial Variable Amplitude Loading
- Two- and Three-Dimensional Numerical Investigation of the Influence of Holes on the Fatigue Crack Growth Path
- Three-dimensional Leak before Break Analysis of Nuclear Pipes Containing Cracks
- Three-Dimensional Extended Analysis and Life Prediction of Gear Crack
- Three-dimensional Simulation of Fretting Crack Nucleation and Growth
- Three-dimensional fatigue crack propagation analysis of welded steel beam based on global-local numerical model
- Three Diminsional Crack Growth Prediction
- The M-Integral for Computing Stress Intensity Factors in Generally Anisotropic Materials
- TF41 Engine Fan Disk Seeded Fault Crack Propagation Test
- Surrogate modeling of high-fidelity fracture simulations for real-time residual strength predictions
- Sub-modeling Of Thermal Mechanical Fatigue Crack Propagation
- Study on the shape change of crack growth rate curve under different forms of additional stress field
- Study on Crack Propagation Characteristics of Pitch Bearing Based on Sub-model
- Study of Mixed-Mode Cracking of Dovetail Root of an Aero-Engine Blade Like Structure
- Structural stress-based methodologies for fatigue assessment of welded railway bridgesStructural stress-based methodologies
- Stress Analysis, Crack Propagation and Stress Intensity Factor Computation of a Ti-6Al-4V Aerospace Bracket using ANSYS and FRANC3D
- Stochastic Framework for Predicting Microstructurally Small Fatigue Life of AA 7075-T651
- Static fracture and modal analysis simulation of a gas turbine compressor blade and bladed disk system
- Simulation of Discrete-source Damage Growth in Aircraft Structures-A 3D Finite Element Modeling Approach
- Simulation of Arbitrary Delamination Growth in Composite Structures Using the Virtual Crack Extension Method
- Simulating Fatigue Crack Growth in Spiral Bevel Pinion
- Simulating 3D Crack Growth In Turbine Engine Components
- Sequential Monte Carlo Enabling Real-time and High-fidelity Prognostics
- SCC growth behaviors of austenitic stainless steels in simulated PWR primary water
- Residual Stress Analysis and Fatigue Assessment of Welded Steel Structures
- Residual Strength Prediction of Damaged Aircraft Structure Using 3D Finite Element Modeling
- Relationships Among Microstructural Features and Crack Propagation in Osteonal Bone Identified Using Finite Element Analysis
- Probabilistic Prognostics and Health Management for Fatigue-critical Components using High-fidelity Models
- Probabilistic Prognosis of Non-Planar Fatigue Crack Growth
- Probabilistic fatigue damage prognosis using surrogate models trained via three-dimensional finite element analysis
- Probabilistic fatigue damage prognosis using a surrogate model trained via 3D finite element analysis
- Potentials and limitations in finite element based crack propagation analysis using FRANC3D
- On fatigue life prediction of Al-alloy 2024 plates in riveted joints
- Numerical Simulation of Fatigue Crack Propagation in Steel Bridge with Welded Stiffeners Subjected to Out-of-plane Loadings
- Non-Deterministic Predictions of Fatigue Life Using In-Situ Diagnostics and Prognostics
- Next-Generation Software Improves Finite Element Modeling Tool Compatibility
- Next generation 3D mixed mode fracture propagation theory including HCF–LCF interaction
- Multiscale Modeling Of Damage Processes In Aluminum Alloys Grain-scale Mechanisms
- Multi-axial fatigue numerical crack propagations in cruciform specimens
- Multi-axial fatigue crack growth uncertainty quantification and risk management
- Mixed mode fatigue crack propagation behaviour of aluminium F357 alloy
- Investigation of variability in fatigue crack nucleation and propagation in alpha+beta Ti-6Al-4V
- Internal Variable Mapping to Support Geometry Adaptive Modeling of Ductile Fracture
- Geometrically Explicit Finite Element modeling Of Aa7075-t651 Microstructure with Fatigue Cracks
- Fracture mechanics and fatigue life assessment of box-shaped welded structures-FEM analysis and parametric design
- Fracture Analysis of a First Stage Turbine Blade by FRANC3D
- Finite Element-Based Methodology for Studying Crack Propagation at the Microstructural Length-Scale in Cortical Bone
- Fatigue life estimation based on LEFM and the study of initial parameters
- Fatigue Life Analysis Of Rail-welds Using Linear Elastic Fracture Mechanics
- Fatigue Assessment and LEFM Analysis of Cruciform Joints Fabricated with Different Welding Processes
- Experimental and Numerical Analysis of Fatigue Crack Growth in Integral Skin-Stringer Panels
- Effect of low temperatures on constant amplitude fatigue properties of Q345qD steel butt-welded joints
- Editorial on Special Issue “Fatigue and Fracture Behaviour of Additive Manufacturing Mechanical Components”
- Development of Simulation Methodology to Predict Crack Growth Behavior in Heavy Duty Truck Components using Full Vehicle Response Dynamic Loads
- Determination of mixed-mode stress intensity factors, fracture toughness, and crack turning angle for anisotropic foam mater
- Critical flaw size in silicon nitride ball bearings
- Crack spacing threshold of double cracks propagation for large-module rack
- Crack growth in the through-thickness direction of hydrided thin-wall Zircaloy sheet
- Coupling Damage-Sensing Particles to the Digitial Twin Concept
- Coupling damage-sensing particles and computational micromechanics to enable the digital twin concept
- Computational Assessment Of Asymptotic Crack Size Of A Prototype Sized Pipe Bend-Comparison With A16 Master Curve
- Comparison of fatigue crack growth of riveted and bonded aircraft lap joints made of Aluminium alloy 2024-T3 substrates – A numerical study
- Characterization And Modeling Of Localized Corrosion Damage Accumulation For Aircraft Structural Integrity
- Assessment of Fatigue Cracks in Rails
- Assessing Structural Integrity of Titanium-Based Alloy Brackets with Flaws Using Franc3D
- Anisotropic Fracture Analysis Of The Bx-265 Foam Insulation Material Under Mixed-mode Loading
- Analysis of the stress intensity factor of welded joints under prior corrosion and complex stress fields
- An integrated software tool for high reliability evaluation of metal engine components
- An integrated software tool for high fidelity probabilistic assessments of metallic aero-engine components
- Advances in Simulation of Arbitrary 3D Crack Growth using FRANC3DNG
- Accounting for non-linear effects in fatigue crack propagation simulations using FRANC3D
- A parametric numerical analysis of stress intensity factors on multiple interacting surface cracks in T-butt joints using FRANC3D
- A numerical analysis for cracks emanating from a surface semi-spherical cavity in an infinite elastic body by FRANC3D
- A Multiscale Damage and Durability Simulation Strategy
- A geometric approach to stochastically modeling fatigue crack propagation at the microstructural length scale
- A geometric approach to modeling microstructurally small fatigue crack formation, part I
- A fracture mechanics based approach for the fretting fatigue of aircraft engine fan dovetail attachments